Foundation Repair Before & After Photos

Problem:

Ms. Léger's house is cracked in several places:

- Cracks at the corners of the interior door frames

- Cracks in the foundation

- 1 '' wide horizontal crack on exterior brick wall

- Nearly 2 '' wide vertical crack on the corner of an exterior foundation wall.

- Floor of the second floor is no longer level

The cause of these problems is the sagging foundation of the house. When the foundation sags, cracks on the foundation and walls are created, it can also have a detachment of part of the foundation from the rest of the house.

The solution

Install PushPiers hydraulic pillars under the footing of the house. They can straighten the house slightly, and the weight of the house is supported solidly. Then, some cracks in the foundation were sealed using our FlexiSpan solution. It is a high viscosity polyurethane polymer. The sealant penetrates deeply into the crack to form a flexible and durable seal. CarbonArmor strips were laid on the corner of an exterior foundation wall to reinforce it as it began to pull away from the house. Finally, in order to straighten the main floor and support it, our SmartJack beams were laid.

With these solutions, Mrs. Léger has nothing more to fear as the foundation of her house is supported solidly and the cracks are sealed.

 * Note that the "after" photo was taken before the crack was sealed.

The problem: This client from Montreal was having problems with his foundation that was sagging on a corner of his house. You could see in the picture big cracks and even stair-type cracks.

The solution: First, we excavated all the soil from the corner of the house, up to the footing. Then, we put our PushPiers, to support the foundation. Note that it is possible to straighten the foundation back to its original state, but this depends on several factors and every project is different.

Problem

Mr. Boerr's building sank into the ground. Several external and internal signs were apparent including cracks on the corners of the doors and windows, in addition to  cracks on the stairs.

Solution

Pile up the building. Our team installed the push piers under the footing to stabilize it and prevent any future subsidence.

Without helical fins, Push Piers can be driven to greater depths without bending, providing support for heavier structures.

We have stabilized our client’s foundations permanently in Montreal-Nord thanks to our Push Piers system.

Push Piers are often the least risky solution when local soil conditions are unknown.

In addition, Push Piers support pillars can be installed from inside and outside and the finish will be clean and neat.

Mr. Young has lived in his home for over 10 years. He already had a few cracks in the foundation of his house, but that didn't worry him. Over time, the cracks widened. Worried, Mr. Young decided to contact Systèmes Sous-sol Québec to find a permanent solution to his problem with foundation cracks.

The solution for our client was to install the CarbonArmor straps where there were cracks. This helps to strengthen and stabilize the foundation walls and prevent the cracks from growing.

With this solution, Mr. Young's foundation walls are permanently reinforced.