Crawl Space Repair Before & After Photos

Mr. Robert contacted us because he needed help with moisture problems in his crawlspace. Upon arriving at the free inspection, we found that the best solution was to encapsulate his crawlspace with the CleanSpace vapor barrier. To start, our team removed the debris from the crawlspace. They then installed the drainage mat, followed by the CleanSpace vapor barrier. Finally, they installed a SaniDry Sedona dehumidifier and a SmartDrain drain system to ensure good humidity and prevent flooding.

A dirty and wet crawl space affects your entire home! As the air of a house moves from below to above, it is necessary to treat the problem at its source ... the crawl space. Encapsulating the area is a good thing for your home and your health! That's what our client in Gatineau is doing. Our specialist therefore recommended the best encapsulation products: CleanSpace, Delta MS, TerraBlock, SmartSump and SaniDry Sedona.

The residents of this house in Gatineau suffered from a very high level of humidity, caused by a non-isolated crawl space.

They have also noticed that the floor was sagging which caused them a deep concern.

As you can see in this picture, we have totally encapsulated the crawl space and the foundation.

This client had cracks repaired in one wall of his block foundation, but had not repaired all of the walls. Over time, one of the walls will start to arch and tilt inward from the basement. If nothing will be done, the situation will only get worse. So, he contacted Systèmes sous-sol Québec in order to stabilize his wall once and for all!

Mrs. Monique B. from Gatineau called us to tell us about her problems related to mold and moisture in her crawl space. Our crew then proceeded to install a CleanSpace membrane, a SmartSump pump system, and two SmartJack support pillars. They also applied Mold-X Neutralizer to areas affected by mold. Our customer can now enjoy her basement without having to worry about water getting in!